AudioCodes MP-202 User Manual

MP-202 Telephone Adapter 206 Document #: LTRT-50605
User's Manual
Feature Details
Security
 HTTPs for Web-based configuration
 Password protected Web pages (MD5)
Telephony Signaling
 In-band:
9 DTMF: Detection and Generation, TIA464B
9 Caller ID: Telcordia, ETSI, NTT - Type I, Telcordia Type II
9 Call Progress Tones
 Out-of-band:
9 FXS Loop-start
9 On/Off Hook, Flash Hook
9 Polarity reversal
Table 15-2: MP-202 Telephone Adapter Hardware Specifications
Power
+12VDC
Interfaces
RJ-45 - 10/100 Base-T for LAN
RJ-45 - 10/100 Base-T for WAN
2xRJ-11 - 2 FXS lines for telephones (POTS)
LED Indications
LAN activity on Ethernet Port
Power on
Phone 1 and Phone 2 - Registered, In Use, Alert
SLIC
characteristics
Maximum Ringer Load (REN) - 5
Short Haul
Ringer Voltage - up to 65Vrms
Configurable Terminating Impedance

AudioCodes MP-202 Specifications

General

Model	MP-202
Category	Adapter
Ports	2 FXS ports
Protocol Support	SIP, H.323
Weight	0.5 kg
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Network Interface	10/100Base-T Ethernet
Voice Codecs	G.711, G.729, G.723.1, G.726
Security	HTTPS, TLS, SRTP
Management	Web-based, SNMP
Power Supply	12V DC