Version 2.6 167 May 1
MP-202 Telephone Adapter 13. Advanced Settings
Note: Do not load this file to a different gateway, since it contains the MAC address,
which is specific to the gateway from where it was saved.
When creating a file for remote configuration update, it is recommended to enable the
'Display modified configuration fields only'. This ensures that the file includes only
parameters that were modified from their default value. You can choose either the conf
format or the flat ini-file format. In both cases, it is recommended to review the file and
ensure that only the parameters that the user has intended to modify appear. This file can
be placed on an FTP or HTTP server for mass configuration update, as described in
Remote Configuration Download.
Note: When rebooting, the gateway restores the settings from its configuration file.
However, if reboot attempts fail three times consecutively, the gateway resets
the configuration file by restoring factory defaults before attempting to reboot.
13.3.1 Loading From a Computer in the Network
To load the MP-202's configuration file from a computer in the network:
1. Click the icon 'Configuration File' from the 'Advanced' screen; the 'Configuration File'
screen is displayed.
2. Click the button 'Load Configuration File'; the screen 'Load Configuration File' opens
(refer to the figure).
Figure 13-4: Load Configuration File
To Next Page
Loading...
Need help?
General
