Version 2.6 185 May 1
MP-202 Telephone Adapter 13. Advanced Settings
¾ For the Telephone Adapter to perform an automatic time update:
Select the 'Enabled' checkbox under the 'Automatic Time Update' section.
Select the protocol to be used to perform the time update by selecting wither the 'Time
of Day' or 'Network Time Protocol' radio button.
Specify how often to perform the update in the 'Update Every' field.
You can define time server addresses by pressing the 'New Entry' link on the bottom
of the 'Automatic Time Update' section.
13.15 Configuring Users
You can add, edit and delete users. When adding a user, you need to specify the following
parameters:
Table 13-2: Managing Users
Parameter Description
Full Name
The remote user's full name.
User Name
The name a remote user will use to access your home network.
New
Password
Type a new password for the remote user. If you do not want to change the remote
user's password leave this field empty.
Retype New
Password
If a new password was assigned, type it again to verify correctness.
To Next Page
Loading...
Need help?
General
