Name: AudioCodes MP-202
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MP-202 Telephone Adapter 32 Document #: LTRT-50605

User's Manual

5.1.1 Configuring Signaling Protocol Parameters

Note: In the current version release, only SIP (Session Initiation Protocol) is

supported.

¾ To configure signaling protocol parameters:

 After clicking the menu 'Voice over IP' in the main screen, the 'Signaling Protocol'

screen opens by default (refer to the figure below).

Figure 5-1: VoIP - Signaling Protocol

Table 5-1: VoIP - Signaling Protocol

Parameter Description

Use SIP Proxy

When checked, outgoing calls will be routed to the configured SIP proxy. If

the parameter 'Use SIP Proxy IP and Port for Registration' is checked as

well, the configured SIP proxy will also be used as the registrar, allowing

incoming calls.

Use SIP Registrar

Check to use a separate SIP registrar server. Default is unchecked.

Other manuals for AudioCodes MP-202

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?

General