Version 2.6 199 May 1
MP-202 Telephone Adapter 13. Advanced Settings
3. Click the link 'New Entry'; the 'Edit Service' screen appears (refer to the figure).
Figure 13-41: Advanced - Protocols - Edit Service
4. Name the service in the parameter 'Service Name' and click the link 'New Service
Ports'; the 'Edit Service Server Ports' screen appears (refer to the figure).
Figure 13-42: Advanced - Protocols - Edit Service - Server Ports
5. You may choose any of the protocols available in the combo box, or add a new one by
selecting 'Other'. When selecting a protocol from the combo box, the screen refreshes,
presenting the respective fields by which to enter the relevant information.
6. Select a protocol and enter the relevant information.
7. Click OK to save the settings.
To Next Page
Loading...
