AudioCodes MP-202 - Creating a PPTP VPN Connection with the Connection Wizard; Figure 9-16: VPN Client or Point-To-Point

Version 2.6 89 May 1
MP-202 Telephone Adapter 9. WAN Settings
9.3.2 Creating a PPTP VPN Connection with the Connection Wizard
¾ To create a new PPTP VPN connection, take these steps:
1. Open the screen 'Network Connections' and click link 'New Connection'; the screen
'Connection Wizard' opens.
2. Select the radio button 'Connect to a Virtual Private Network over the Internet' and
click 'Next'; the screen 'Connect to a Virtual Private Network over the Internet' opens.
3. Select the radio button 'VPN Client or Point-To-Point' and click 'Next'; the screen 'VPN
Client or Point-To-Point' opens (refer to the figure).
Figure 9-16: VPN Client or Point-To-Point