AudioCodes MP-202 User Manual

MP-202 Telephone Adapter 88 Document #: LTRT-50605
User's Manual
4. Select the radio button 'Point-To-Point Tunneling Protocol (PPTP) with User Name
and Password Authentication' and click Next; the screen 'Point-to-Point Tunneling
Protocol (PPTP)' opens (refer to the figure).
Figure 9-14: Point-to-Point Tunneling Protocol
5. Enter the username and password provided by your Internet Service Provider (ISP).
6. Enter the PPTP server host name or IP address provided by your ISP.
7. Select whether to obtain an IP address automatically or specify one.
8. Click Next; the screen 'Connection Summary' opens (refer to the figure).
Figure 9-15: Connection Summary
9. Check the 'Edit the Newly Created Connection' check box if you wish to be routed to
the new connection's configuration screen after clicking Finish.
10. Click Finish to save the settings; the new PPTP connection is added to the network
connections list and is configurable like any other connection.

AudioCodes MP-202 Specifications

General

Model	MP-202
Category	Adapter
Ports	2 FXS ports
Protocol Support	SIP, H.323
Weight	0.5 kg
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Network Interface	10/100Base-T Ethernet
Voice Codecs	G.711, G.729, G.723.1, G.726
Security	HTTPS, TLS, SRTP
Management	Web-based, SNMP
Power Supply	12V DC