MP-202 Telephone Adapter 148 Document #: LTRT-50605
User's Manual
8. Click 'OK' to save the settings; the screen 'Edit Service' presents your entered
information. Click 'OK' again to save the port triggering rule; the screen 'Port
Triggering' now includes the new port triggering entry (refer to the figure).
Figure 12-18: New Port Triggering Rule
You can disable a port triggering rule without having to remove it from the screen 'Port
Triggering'.
To temporarily disable a rule, clear the check box next to the service name.
To reinstate it later, simply reselect the check box.
To remove a rule, click the action icon 'Remove' for the service; the service is
permanently removed.
There may be a few default port triggering rules listed when you first access the port
triggering screen. Note that disabling these rules may result in impaired gateway
functionality.
12.6 Website Restrictions
You can configure the gateway to block specific Internet websites so that they cannot be
accessed from computers in the home network. Moreover, restrictions can be applied to a
comprehensive and automatically-updated table of sites to which access is not
recommended.
To Next Page
Loading...
Need help?
General
