Name: AudioCodes MP-202
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MP-202 Telephone Adapter 74 Document #: LTRT-50605

User's Manual

¾ To perform a minimal QoS configuration for VoIP:

1. Click on menu 'QoS' on the left sidebar and then click tab 'Traffic Shaping'; the Quality

of Service - Traffic Shaping screen opens.

2. Click 'New Entry' (or the icon under column 'Action'); the screen 'Add Device Traffic

Shaping' opens.

3. From the drop-down list adjacent to parameter 'Device', select 'Default WAN Device'

(or your PPTP/L2TP connection you have created) and click OK; the screen 'Edit

Device Traffic Shaping' opens.

4. Limit the Tx bandwidth (parameter 'Tx Bandwidth') according to your modem’s uplink

bandwidth.

5. To prevent jitter in outgoing RTP packets, select 'When Active Voice Calls Exist' from

the drop-down list adjacent to parameter 'TCP Serialization' and use parameter

'Maximum Delay' to define the maximum allowed delay (e.g. 20 milliseconds). This will

cause long TCP packets to be fragmented when there is an active voice call.

Figure 8-12: QoS - Edit Device Traffic Shaping

Other manuals for AudioCodes MP-202

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?

General