AudioCodes MP-202 User Manual

Version 2.6 25 May 1
MP-202 Telephone Adapter 3. Setting up a Network Connection
3.2.2.1.3 Point-to-Point Protocol over Ethernet (PPPoE)
 Select 'Point-to-point protocol over Ethernet (PPPoE)' from the 'Connection Type'
drop-down list (refer to the figure).
Figure 3-7: Internet Connection - PPPoE
Your ISP should provide you with the following information:
 Login user name
 Login password
3.2.2.1.4 Point-to-Point Tunneling Protocol (PPTP)
 Select 'Point-to-Point Tunneling Protocol (PPTP)' from the 'Connection Type' drop-
down list (refer to the figure).
Figure 3-8: Internet Connection - Point-to-Point Tunneling Protocol
Your ISP should provide you with the following information:
 PPTP Server Host Name or IP Address
 Login user name
 Login password

AudioCodes MP-202 Specifications

General

Model	MP-202
Category	Adapter
Ports	2 FXS ports
Protocol Support	SIP, H.323
Weight	0.5 kg
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Network Interface	10/100Base-T Ethernet
Voice Codecs	G.711, G.729, G.723.1, G.726
Security	HTTPS, TLS, SRTP
Management	Web-based, SNMP
Power Supply	12V DC