Name: AudioCodes MP-202
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MP-202 Telephone Adapter 36 Document #: LTRT-50605

User's Manual

 Uncheck the box 'Use SIP Proxy IP and Port for Registration' and check 'Use SIP

Registrar'; the parameters screen for 'SIP Registrar' opens (showing the basic

parameters).

Figure 5-3: VoIP - Signaling Protocol - SIP Proxy and Registrar

The table below shows descriptions of those SIP Registrar parameters that differ from SIP

Proxy parameters. Descriptions of common parameters can be seen under the section 'SIP

Proxy and Registrar', above.

Table 5-5: VoIP - Signaling Protocol - SIP Registrar SIP

Parameter Description

Use SIP Registrar

Check the box to use a separate SIP registrar server.

Registrar Address

The IP address or host name of the registrar server.

Registrar Port

The UDP or TCP port of the registrar server.

Registrar Expires

The registration timeout, in seconds.

Other manuals for AudioCodes MP-202

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?

General