Version 3.0.1 161 July 2010
MP-20x Telephone Adapter 12. Remote MP-20x Telephone Adapter Management
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
IPRouters ip_routers_get/set
Comma-separated list of IP addresses of
routers on this subnet. Also known as
default gateway. Support for more than
one Router address is optional.
MaxAddress lan_host_config_managem
ent_get/set
rg_conf dhcps/end_ip
Specifies the last address in the pool to be
assigned by the DHCP server on the LAN
interface.
MinAddress lan_host_config_managem
ent_get/set
rg_conf dhcps/start_ip
Specifies the first address in the pool to be
assigned by the DHCP server on the LAN
interface.
SubnetMask lan_host_config_managem
ent_get/set
rg_conf dhcps/ netmask
Specifies the client’s network subnet mask.
12.2.2.1.3 Configuring VoIP via TR-104
Table 12-9: InternetGatewayDevice.Services.VoiceService.i.Capabilities
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
ButtonMap
- Support for a configurable button map. A true
value indicates support for a configurable
button map via the
VoiceService.{i}.VoiceProfile.{i}.ButtonMap
object.
DSCPCoupled
- A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same DSCP marking as
transmitted RTP packets.
If the value is true, the CPE must not support
the DSCPMark parameter for call control.
EthernetTaggingCou
pled
- A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same Ethernet tagging
(VLAN ID Ethernet Priority) as transmitted
RTP packets.
If the value is true, the CPE must not support
the VLANIDMark or EthernetPriorityMark
parameters within a call control object (e.g.,
SIP, MGCP, or H323).