Austro Engine AE330 - Page 178

Maintenance Manual
E4.08.04
Issue date: 14-Apr-2015
Page: 71-42
Revision no: 25
Fig. 71 - 58
The pigtail of OPS has to be connected to the heat exchanger (9 Nm). The engine harness has to be
fixed with cable tie to the starter.
Fig. 71 - 59
Clamp is used for fixation the branch of GEN. The screw of MOK which is used for mounting the
clamp shall also be used to connect the pigtail of GEN (5 Nm). W11/1 loop and pigtail of MOK have to
be connected to the screw of the oil sump (5 Nm).
Pigtail OPS
OPS
Heat exchanger
05
05
09
W11/1
04
Pigtail GEN
Oil sump
Pigtail MOK
04