Avaya PARTNER - Music on Hold

PARTNER Phone Administration Page 109
- Issue 1b (22 February 2010)IP Office PARTNER Version
Holding Calls: Hold Recall Time
13.2 Music on Hold
When music-on-hold is activated and available, a caller on hold hears the hold music connected to the system.
To change the setting of the music-on-hold (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #602. The phone displays Music on Hold.
3.Enter the appropriate value:
· 1 = Active (the default setting).
· 2 = Not Active.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To change the setting of the music-on-hold (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to Auxiliary Equipment. When displayed, press
Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Music on Hold. When displayed, press Select.
5.The current setting is shown.
6.Press 1 or 2. Alternatively use the left or right arrow icons to toggle the setting or Default to return to the
default setting (Active).
· 1 = Active (the default setting).
· 2 = Not Active.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
7