Avaya PARTNER - Intercom Dial Tone

PARTNER Phone Administration Page 71
- Issue 1b (22 February 2010)IP Office PARTNER Version
Extension Settings: Call Waiting
8.4 Intercom Dial Tone
Use this feature to determine the type of dial tone the system provides at an extension. It may be necessary to change
this setting to Machine (outside line) dial tone for an autodialing device, such as a fax or modem, that has trouble making
calls. For example, if you have a modem that checks for outside line dial tone before dialing, use this procedure to
change from Regular to Machine dial tone.
To change the intercom dial tone setting for an extension (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #309. The phone displays Intercom Dial Tone.
3.At the Extension: prompt, enter the number of the extension to be programmed.
4.Enter the appropriate value:
· 1 = Regular dial tone (the default setting).
· 2 = Machine (outside line) dial tone.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To change the intercom dial tone setting for an extension (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to Extensions. When displayed, press Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Intercom Dial Tone. When displayed, press
Select.
5.At the Extension: prompt enter the extension you want to edit.
6.The current setting is displayed.
7.Enter 1 or 2. Alternatively use the left or right arrow icons to toggle the settings or Default to return to the
default setting.
· 1 = Regular dial tone (the default setting).
· 2 = Machine (outside line) dial tone.
8.Use the up or down arrow buttons to select another extension to adjust if required.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
7