Avaya PARTNER - Outside Conference Denial

PARTNER Phone Administration Page 75
- Issue 1b (22 February 2010)IP Office PARTNER Version
Extension Settings: Internal Hotline
8.7 Outside Conference Denial
Use this feature to determine if users can include more than one outside party in a conference call.
· This feature setting applies to all system users.
· If outside conference is allowed, you can have up to 64 outside parties in a conference butonly up to 2 analog
lines. If outside conference is disallowed, you can have only one outside party in a conference.
To allow or disallow conferences with two outside parties (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #109. The phone displays Outside Conf Denial.
3.Press a digit to display the appropriate value:
· 1 = Allow conference calls with multiple outside parties (the default setting).
· 2 = Disallow conference calls with two outside parties.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To allow or disallow conferences with two outside parties (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to Extensions. When displayed, press Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Outside Conf Denial. When displayed, press
Select.
5.The current setting is displayed.
6.Press either 1 or 2. Alternatively use the left or right arrow icons to toggle through the settings or Default to
return to the default setting.
· 1 = Allow conference calls with multiple outside parties (the default setting).
· 2 = Disallow conference calls with two outside parties.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
7