Avaya PARTNER - Display Language

PARTNER Phone Administration Page 69
- Issue 1b (22 February 2010)IP Office PARTNER Version
Extension Settings: Extension Name
8.2 Display Language
Use this feature to change the language used for messages that appear on telephone display. The language is set for
each extension, so telephones in the same system can display different languages.
To change the display language for an extension (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #303. The phone displays Display Language.
3.At the Extension: prompt enter the extension number that you want to set the language for. The current display
language is shown.
4.To change the display language press the appropriate number:
· 1 = English (the default setting).
· 2 = Spanish.
· 3 = French.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To change the display language for an extension (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to Extensions. When displayed, press Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Display Language. When displayed, press Select.
5.At the Extension: prompt enter the extension you want to edit.
6.The current setting is displayed.
7.Enter 1, 2 or 3. Alternatively use the left or right arrow icons to toggle the settings or Default to return to
the default setting.
8.Use the up or down arrow buttons to select another extension to adjust if required.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
7