PARTNER Phone Administration Page 68
- Issue 1b (22 February 2010)IP Office PARTNER Version
To change an extension name (1408/1416 Phone)
1.Do one of the following depending on whether you want to change the programming of the extension or of another
extension.
To program another extension
1.At the extension press Admin.
2.Use the up or down arrow buttons
to scroll the display to Telephone
Programming. When displayed, press
Select.
1.At extension 10 or 11, press Admin.
2.Use the up or down arrow buttons to scroll the display to
Centralized Programming. When displayed, press Select.
3.At the Extension: prompt enter the extension that you want to
configure.
2.Use the up or down arrow buttons to scroll the display to Extension Name. When displayed, press Select.
3.The current setting is displayed.
4.To enter a new name dial the characters using the dial pad buttons. When finished press Enter.
· Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
· Do not use punctuation characters such as #, ?, /, -, _ and , in the name. Start the name with an alphabetic
character. Note that the name is case sensitive and must be unique. French and Spanish languages do not
offer accented characters
3.To remove the current name press Clear.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
To Next Page
Loading...
