Avaya PARTNER - Automatic Daylight Savings Time

PARTNER Phone Administration Page 31
- Issue 1b (22 February 2010)IP Office PARTNER Version
Date and Time: Network Time Synchronization
3.4 Automatic Daylight Savings Time
This feature automatically updates the system clock for annual daylight savings time changes. Turn this feature off if you
live in an area that does not use daylight savings time.
To change the status of Automatic Daylight/Standard Time (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #126. The phone displays Auto Daylight Savings.
3.Press either 1 to display Active (the default setting) or 2 to display Not Active.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To change the status of Automatic Daylight/Standard Time (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to System Parameters. When displayed, press
Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Network Time Synch. When displayed, press
Select.
5.The current setting is displayed.
6.Press either 1 to display Active (the default setting) or 2 to display Not Active. Alternatively use the left or
right arrow icons to toggle through the settings or Default to return to the default setting.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
7