PARTNER Phone Administration Page 157
- Issue 1b (22 February 2010)IP Office PARTNER Version
System Maintenance: System Copy
15.7 System Default
Use this feature to reset the system and return its configuration to the default settings. Reset the system only when
advised to do so by technical support personnel.
· WARNING
This process will restart the phone system and disconnect all currently connected calls.
· The system reset begins immediately. It takes approximately 5 minutes.
To default the system (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #989.
3.When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
4.The system will be immediately restarted.
To default the system (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Dial #989.
4.When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
5.The system will be immediately restarted.
To Next Page
Loading...
