Avaya PARTNER - Table of Contents

PARTNER Phone Administration Page 114
- Issue 1b (22 February 2010)IP Office PARTNER Version
Function
Description
Shortcut
LED
Pickup Group
A button set to this function allows the user to answer a call being
presented to any extension that is a member of the pickup group
configured for the button.
Intercom 1,
<661-664>
–
Privacy
A button set to this function allows the user to turn privacy on or
off. When on, other extensions are not able to bridge into the
user's calls.
07
–
Recall
A button set to this function allows the user to send a recall or
hook flash signal.
03
–
Save Number Redial
A button set to this function allows the user to save the number
dialed during a call and to redial that number when idle. This can
be used when the number dialed does not answer.
04
–
Simultaneous Page
A button set to this function allows the user to save the number
dialed during a call and to redial that number when idle. This can
be used when the number dialed does not answer.
Intercom 1,
*70
–
Station Lock
A button set to this function allows the user to lock their extension
from being used to make calls. After they press the button, they
are prompted to enter a four digit code after which the extension is
locked. If the extension is already locked, pressing the button
prompts for reentry of the four digit code to unlock the extension.
21
–
Station Unlock
A button set to this function allows the user to unlock any
extension without needing to know the code that was used to lock
that extension. This function can only be used by extensions 10
and 11. When the button is pressed, the user is prompted to enter
the number of the locked extension.
22
–
VMS Cover
A button set to this function allows the user to switch use of
voicemail coverage for their extension on or off.
15
–
VMS Mailbox Transfer
A button set to this function allows the user to transfer their
current call to an extension's mailbox. After pressing the button,
the current call is put on hold and the user can then enter the
target extension number to indicate the mailbox required.
14
Some functions are unique, ie. if already assigned to a button, assigning the function to another button will automatically
clear the setting from the existing button.
Some functions are only supported on buttons that include lights to indicate status. If programmed onto a button without
lights the function may not work.
140
95
141
142
143
144
145
146
147
148