Avaya PARTNER - Page 113

PARTNER Phone Administration Page 113
- Issue 1b (22 February 2010)IP Office PARTNER Version
Button Programming: Button Programming Functions
Function
Description
Shortcut
LED
Auto Dial - Other
A button set to this function allows the user to make a call using a
number stored by the button. The number can be an internal
number, an external number, an account code or any other
number. The button can then be used when a number of that type
needs to be dialed.
Intercom 2,
<number>
–
Call Coverage
A button set to this function allows the user to switch call coverage
for their extension on or off. The button settings include the
extension number of the extension providing coverage. When on,
calls to the user that ring unanswered for the user's number of
coverage rings then also start ringing at the call coverage
extensions.
20
–
Caller ID Log
A button set to this function allows the user to view the phone
system's call log of all caller IDs of calls received by the system. To
use the button the user must be one of the three extensions
configured for call ID logging .
23
Yes
Call Forwarding
A button set to this function allows the user to redirect all their calls
to another number. Extensions with Remote Call Forwarding
enabled can also forward calls externally by specifying a personal
speed dial as the destination.
11
–
Call Pickup
A button set to this function allows the user to pickup a call alerting
at a specified extension. Separate buttons can be created for each
extension for which call pickup is required.
Intercom 1,
6, <Extn>
–
Caller ID Inspect
A button set to this function allows the user to see the caller ID of
a call on another line without interrupting the current call to which
they are connected.
17
Yes
Caller ID Name Display
A button set to this function allows the user to swap the display of
caller ID name and number information on their extension.
16
Yes
Calling Group
A button set to this function allows the user to call or page the
calling group represented by the button.
Intercom 1,
<Group>
–
Conference Drop
A button set to this function allows the user to drop a call from a
conference.
06
–
Contact Closure 1
A button set to this function allows the user to operate the
system's contact closure 1 connection. The user must be a
member of the contact closure group .
41
–
Contact Closure 2
A button set to this function allows the user to operate the
system's contact closure 2 connection. The user must be a
member of the contact closure group .
42
–
Do Not Disturb
A button set to this function allows the user to set the extension's
do not disturb on or off.
01
Yes
Hot Dial
A button set to this function allows the user to dial a number
without first going off hook or pressing the SPEAKER button.
Automatic line selection is used to select a line.
26
Yes
Hunt Group
A button set to this function allows the user to call or page the hunt
group represented by the button.
Intercom 1,
<Group>
–
Idle Line Pickup
A button set to this function allows the user to seize a line if that
line is idle. This allows the user to access line for which they do not
have a line appearance button on their extension.
Intercom 1, 8
–
Last Number Redial
A button set to this function allows the user to redial the last
external number dialed.
05
–
Loudspeaker Paging
A button set to this function allows the user to redial the last
external number dialed.
Intercom 1,
70
–
Night Service Button
A night service button is used to switch night service on/off.
–
Yes
119
121
100
127
47
123
42
61
125
126
128
129
91
130
131
53
53
132
53
53
133
134
26
135
92
136
137
138
139