Avaya PARTNER - Station Unlock

PARTNER Phone Administration Page 146
- Issue 1b (22 February 2010)IP Office PARTNER Version
14.30 Station Unlock
A button set to this function allows the user to unlock any extension without needing to know the code that was used to
lock that extension. This function can only be used by extensions 10 and 11. When the button is pressed, the user is
prompted to enter the number of the locked extension.
· If an extension already has a button set to this function, creating another button with this function will
automatically clear the setting from the existing button.
· To access this function without a programmable button, press FEATURE and then dial 22.
To create a station unlock button (ETR 18D/ETR 34D Phone)
1.Do one of the following depending on whether you want to change the button programming of the extension or of
another extension.
To program the extension
To program another extension
1.At the phone press Feature 00.
2.Program Extension: is shown on the
display.
3.Press the button that you want to edit or
enter from 03 to 80 or press the
corresponding line appearance button
directly.
1.At one of the system administration telephones (extension 10
and 11), press Feature 00 followed by two presses of
Intercom 1 and one press of Intercom 2. Centralized
Programming: is shown on the display.
2.At the Extension: prompt enter the number of the extension.
3.Enter from 03 to 80 to select the line button you want to edit or
press the corresponding line appearance button directly.
4.The current setting of that button is displayed.
3.Dial FEATURE 22.
4.The current setting of the button will now be set to Station Unlock.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To create a station unlock button (1408/1416 Phone)
1.Do one of the following depending on whether you want to change the button programming of the extension or of
another extension.
To program the extension
To program another extension
1.At the extension press Admin.
2.Press the programmable button you
want to change. Alternatively:
· Use the up or down arrows to
scroll to Telephone Programming
. Press Select.
· At the Button: prompt press the
button to edit or enter from 03 to
80 or press the corresponding line
appearance button directly.
1.At extension 10 or 11, press Admin.
2.Use the up or down arrow buttons to scroll the display to
Centralized Programming. When displayed, press Select.
3.At the Extension: prompt enter the extension that you want to
configure.
4.Use the up or down arrow buttons to scroll the display to
Button Programming. When displayed, press Select.
5.At the Button: prompt enter from 03 to 80 or press the
corresponding line appearance button directly..
2.The current setting of that button is displayed.
3.Press Program and either dial #22 or use the up or down arrow buttons to scroll the display to Station
Unlock and press Select.
4.The current setting of the button will now be set to Station Unlock.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.