Avaya PARTNER - Using the Call Screening Feature

PARTNER Phone Administration Page 38
- Issue 1b (22 February 2010)IP Office PARTNER Version
To create a list of disallowed phone numbers (ETR 18D/34D)
1.At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2.Dial #404. The phone displays Disallowed Lists.
3.At the List Number prompt, enter a list number 1 to 8.
4.At the Entry prompt, select a list entry 01 to 10.
5.At the Data prompt, enter the first telephone number.
6.To save the telephone number in memory, press Enter . See the button overlay map for the location of the
Enter button.
7.Do one of the following:
· To add other telephone numbers to this list, press Next Item to select a different list entry and repeat
Steps 5 and 6.
· To change the telephone number you just entered, press Remove and repeat Steps 5 and 6.
· To delete the telephone number you just entered, press Remove .
· To create another list, press Next Procedure + Prev Procedure and repeat from Step 3.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To create a list of disallowed phone numbers (1408/1416 Phone)
1.At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2.Use the up or down arrow buttons to scroll the display to System Administration. When displayed, press
Select.
3.Use the up or down arrow buttons to scroll the display to Restrictions/Permissions. When displayed,
press Select.
· Alternatively, dial # and the same code as used by ETR phones for system administration .
4.Use the up or down arrow buttons to scroll the display to Disallowed Lists. When displayed, press Select.
5.At the List Number: prompt enter 1 to 8 for the list you want to edit.
6.At the Entry: prompt enter the list entry you want to change by entering 01 to 10.
7.The current setting is displayed.
8.Enter the new number and press Enter. To enter a wildcard digit press HOLD. Press Clear to remove the existing
number.
9.Use the up or down arrow buttons to scroll through the other numbers in the list.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
14
14
14
14
14 14
7