B&R Automation PC 620 - Page 121

Technical data • Entire device
Section 2
Technical data
121Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
The cable types and resolutions shown with a footnote 1) in the previous table can only be
implemented starting with the following firmware and hardware versions:
15
5CASDL.0150-00
5CASDL.0150-01
5CASDL.0150-03
5CASDL.0150-00
5CASDL.0150-01
5CASDL.0150-03
5CASDL.0150-00
5CASDL.0150-01
5CASDL.0150-03
5CASDL.0150-00
1)
5CASDL.0150-01
1)
5CASDL.0150-03
1)
-
-
-
20
5CASDL.0200-00
1)
5CASDL.0200-03
1)
5CASDL.0200-00
1)
5CASDL.0200-03
1)
5CASDL.0200-00
1)
5CASDL.0200-03
1)
5CASDL.0200-00
1)
5CASDL.0200-03
1)
-
25
5CASDL.0250-00
1)
5CASDL.0250-03
1)
5CASDL.0250-00
1)
5CASDL.0250-03
1)
5CASDL.0250-00
1)
5CASDL.0250-03
1)
-
-
-
-
30
5CASDL.0300-00
1)
5CASDL.0300-03
1)
5CASDL.0300-00
1)
5CASDL.0300-03
1)
5CASDL.0300-10
2)
5CASDL.0300-13
2)
5CASDL.0300-10
2)
5CASDL.0300-13
2)
-
-
40
5CASDL.0400-10
2)
5CASDL.0400-13
2)
5CASDL.0400-10
2)
5CASDL.0400-13
2)
5CASDL.0400-10
2)
5CASDL.0400-13
2)
5CASDL.0400-10
2)
5CASDL.0400-13
2)
-
-
1) See table 53 "Requirements for SDL cable with automatic cable adjustment (equalizer)", on page 121
2) See table 54 "Requirements for SDL cable with extender and automatic cable adjustment (equalizer)", on page 122
Firmware Name Version Note
MTCX FPGA Firmware on the APC620 v 01.15 The version is read from BIOS - see the
BIOS description.
Supported starting with the APC620 /
PPC 700 Firmware upgrade (MTCX,
SDLR, SDLT) V01.10, available in the
download area of the B&R homepage.
MTCX PX32 Firmware on the APC620 v 01.55
SDLR FPGA Firmware on the AP Link SDL receiver and
transceiver
v 01.04
SDLT FPGA Firmware on the AP Link SDL transmitter v 00.02
Hardware Name Revision Note
5DLSDL.1000-00 AP Link SDL receiver Rev. B0
5DLSDL.1000-01 AP Link SDL transceiver Rev. B0
Table 53: Requirements for SDL cable with automatic cable adjustment (equalizer)
Cables
Segment length [m]
Resolution
VGA
640 x 480
SVGA
800 x 600
XGA
1024 x 768
SXGA
1280 x 1024
UXGA
1600 x 1200
Table 52: Segment lengths, resolutions and SDL cables (cont.)