7. Advanced
7.5.5 Load
How to load a geometry file ?
1. Press MENU to activate the Tool bar
2. Press → to select Geometry
3. Press ↓ to Pull down the Geometry menu
4. Press ↓ to select Load
5. Press ENTER
A dialog box is displayed
Image 7-44
6. Use the cursor key ↑ and ↓ to select the desired geometry file
7. Press ENTER
Tip: When starting a new geometry setup it is advised to select the “No_Distortion” file.
The file is loaded and the geometry settings are adapted.
R59770066 SIM 7Q SERIES 07/10/2013
107
To Next Page
