4. Installation
4.7.1 Power connection
Voltage, Ampere, Frequency rating
Projector type
Voltage range (AC) Current
Frequency
SIM 7
100 – 240 V single phase 6 – 3 A 50 – 60 Hz
How to connect the power ?
1. Use the supplied power cord to connect the projector to the power outlet.
2. Plug the female power connector into the male connector at the rear of the projector
Image 4-27
Barco SIM7 Power connection
3. Secure the connection with the locking spring.
OPEN CLOSED
Image 4-28
CAUTION: To prevent damage to the projector always ensure that the locking spring is well engaged !
R59770066 SIM 7Q SERIES 07/10/2013 35
To Next Page
Loading...
