Barco SIM 7Q HB - True Motion Reproduction

7. Advanced
7.8.8 True motion reproduction
What can be done?
Some visible artefacts on moving images can be avoided by switching on True motion reproduction.
How to enable/disable True motion reproduction?
1. Press MENU to activate the Tool bar
2. Press → to select the Dis play setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select True motion reproduction
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable (ON) or disable (OFF) True motion reproduction
Image 7-150
7. Press ENTER to activate the selection
R59770066 SIM 7Q SERIES 07/10/2013
183