8. Maintenance
8. MAINTENANCE
About this chapter
This chapter contains the lamp replacement procedure, which can be done by a trained operator. Next to that, some information
about air filter replacement is available. The air filter replacement itself can only be performed by Barco qualified service technicians,
since a ’hidden’ menu item is needed to reset the air filter runtime.
Maintenance procedures like lens cleaning, etc are also explained. These procedures can easily be performed by the operator or
owner of the projector.
Advanced service information
Advanced service information for qualified service technicians (e.g. Service manual) can be found on https://my.barco.com/de-
fault.asp. Registration is needed.
Overview
• Cleaning the lens
• Cleaning the exterior of the projector
•Airfilter replacement
• Lamp replacement
R59770066 SIM 7Q SERIES 07/10/2013
233
To Next Page
Loading...
