Barco SIM 7Q HB - Brightness Adjustment; Setting the Brightness

7. Advanced
7.3.2.2 Setting the Brightness
Brightness adjustment
Adjusting the brightness will affect the dark areas of the image. Increase the brightness to “lighten” up the parts that are too dark.
How to change the Brightness
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Brightness
7. Press ENTER
On the screen appears now a slider box
Image 7-7
8. Use ←or → , the numeric keys on the remote, or the keypad to change the brightness
80 R59770066 SIM 7Q SERIES 07/10/2013