Barco SIM 7Q HB - Selecting a DVI Source

7. Advanced
7.2.1 Selecting a DVI source
How to select the L2 DVI-1 source ?
1. Press MENU to activate the Tool bar
2. Press ↓ to Pull down the Source Selection menu
3. Use ↑ or ↓ to select L2 D VI-1
Image 7-3
4. Press ENTER to confirm your choice
A bullet indicates the selected source which now appears on the screen.
Adjustments on the L2 DVI-1 source
The digital nature of this signal eliminates the need for adjustments.
In the same way, the following sources can be selected and adjusted: L2 DVI-2 and L2 Twin Dual DVI
74 R59770066 SIM 7Q SERIES 07/10/2013