7. Advanced
7.5.6.6 Shift Adjustment
What can be done with the Shift adjustment ?
With the Shift adjustment it is possible to shift the whole image. This is considered as a displacement of the 4 corner points of the
2x2 mode. The same dialog box is used as for the geometry edit.
How to use the Shift adjustment?
1. Start up the Geometry Edit menu
2. Press ↓ to select Shift ....
3. Press ENTER
A dialog box is displayed. Note that In the shift adjustment, the Adjust mode is selected by default (instead of the Select mode
for the other geometry adjustments).
4. Press ENTER to go to the Edit M ode
The Edit mode is selected
Image 7-73
5. Use ↑ and ↓ to select the PixelsX edit box
The PixelsX edit box is focused
Image 7-74
6. Press ENTER
126
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
