4. Installation
Image 4-15
Screws to lock the lens scheimpflug settings (left side)
Image 4-16
Screws to lock the lens scheimpflug settings (right side)
How to mount the lens on the projector and adjust the Scheimpflug?
1. Remove the top lens cover (6 screws)
Image 4-17
Top lens cover: fixing screws
2. Remove the bottom lens cover (3 screws)
Image 4-18
Bottom lens cover: fixing screws
3. Remove the lock nuts and washers from the lens holder studs, but leave the springs on the lens holder studs
28
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
