7. Advanced
7.3.3 Scaling
What can be done?
The scaling of the source image can be chosen from three presets. Depending on the setting, the source signal will be displayed in
a different size and will possibly be stretched in one way or another.
• None: the source image will be shown in native resolution of the source
• Best Fit: the source image will be scaled to the biggest possible size without being distorted (e.g. stretched in one direction)
• Full-screen: the source image will be scaled and stretched in order to fill the full native resolution of the projector. This can lead
to an distorted image (e.g. stretched in one direction or the other)
How to scale the image?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Scaling
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired way of scaling
Image 7-10
R59770066 SIM 7Q SERIES 07/10/2013 83
To Next Page
Loading...
