7. Advanced
Depending on the geometry mode, the dialog box may slightly differ, the dialog box below is for a 2x2 mode adjustment.
Image 7-48
Field
/adjustment
Description Notes
Level 2x2 gives the selected geometry adjustment. In this case, a
2x2 adjustment
Colom
column corresponding to the selected point in a 2x2 adjustment column will be between 0
and 32 (steps of 32)
Row row corresponding to the selected point in a 2x2 adjustment row will be between 0 and
32 (steps of 32)
PixelX
this slider box adjusts the new position of the point along
the x axis
High values can introduce some clipping
effects
PixelY
this slider box adjusts the new position of the point along
the y axis
High values can introduce some clipping
effects
edit box PixelX this edit box allows to edit the position of the point along
the x axis
edit box PixelY
this edit box allows to edit the position of the point along
the y axis
Axislink see ’Axislink’
Modes
see ’Geometry Edit Modes’
Tabl e 7- 2
dialog box legend
When applying a distortion to the image this may take a certain time. During this operation, a text box is
shown.
Busy
Image 7-49
Busy message
R59770066 SIM 7Q SERIES 07/10/2013 111
To Next Page
Loading...
