4. Installation
4.2 Fixation points at the bottom of the projector
Describing the fixation points
To fix the projector to its support, three bolts can be screwed into the threaded holes at the bottom of the projector. The bolts must
meet the following specifi cations:
• bolt type: M8x1.25
• strength class: 8.8 or higher
• preferred bolt length (bolt head not included): 25 mm < bolt length < 30 mm
• mounting torque range: 20 Nm (177 lbf.in) < torque < 23 Nm (205 lbf.in)
Image 4-2
Fixation points
R59770066 SIM 7Q SERIES 07/10/2013 19
To Next Page
Loading...
