Barco SIM 7Q HB - CLO-TOD Color Tracking

7. Advanced
7.8.10.5 CLO-TOD color tracking
Description
CLO-TOD color tracking is used to compensate for color variation caused by changing the dimmer transmission. By default CLO-
TOD color tracking is enabled.
It is however possible to disable CLO-TOD color tracking. In this case, the color variation amongst different dimmer transmissions
(i.e. different TOD settings) is not compensated.
Disabling CLO-TOD color tracking
1. In the OSD, browse to Display setup > D ynacolor > CLO-TOD color tracking > Off.
2. Press Enter to confirm.
Image 7-167
Enabling CLO-TOD color tracking
1. In the OSD, browse to Display setup > D ynacolor > CLO-TOD color tracking > O n.
2. Press Enter to confirm.
204
R59770066 SIM 7Q SERIES 07/10/2013