7. Advanced
7.9.5 Automatic shutdown
How to switch to Automatic Shutdown mode?
1. Press MENU to activate the Menu bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Automatic Shutdown
5. Press → to select the Automatic Shutdown item
6. Press ↑ or ↓ to select On or Off
Image 7-180
7. Press ENTER
In case Off has been selected, a warning will be displayed to make sure that the operator is fully aware of the fact that the lamp
warranty will expire when the projector stays in active mode for over 24 hours continuously. A confirmation is asked for. The
operator can then choose to agree (Yes) or to go back to Automatic Sh
utdown mode (No)
Image 7-181
R59770066 SIM 7Q SERIES 07/10/2013 221
To Next Page
Loading...
