7. Advanced
7.6.6.2 CLO Target
What must be done?
The light output target for the CLO is set in this menu. This value is forced on the projector provided the CLO has been set ON and
the target can be met.
The CLO target can be set in the range 200 .. 30000 for SIM 7Q & SIM 7Q HC. This range is extended to 200 ..
40000 for SIM 7Q HB & SIM 7Q HB&C.
How to set the CLO target ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lampsitem
3. Press ↓ to pull down the Lam ps menu
4. Use ↑ or ↓ to select CLO
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Target ...
Image 7-105
7. Press ENTER
A dialog box is displayed
Image 7-106
8. Use ←or →, the numeric keys on the remote, or the keypad to change the target value.
146
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
