8. Maintenance
8.3 Air filter replacement
CAUTION: Extreme care must be taken to avoid dust intrusion in or dust infection of the projector.
WARNING: The air filters must always be present and mounted in a correct way!
Description
Two air filters are used to prevent dust from entering the projector. These air filters must be checked and replaced on a regular
basis, depending on the environment conditions of the projector.
x-cube air filter
electronics air filter
Image 8-1
Air filters: location
A good practice in a clean environment is to check/replace both air filters on each lamp replacement. In dusty conditions, the air
filters must be checked at least once a month.
The two different air filters used in this projector are:
236
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
