Barco SIM 7Q HB - Lamp Removal; Removing the Lamp; Lamp Cover Removal; Lamp Power Connector (SIM 7 Q & SIM 7 Q HC)

8. Maintenance
8.4.1 Lamp removal
Necessary tools
Torx screwdriver T10
Removing the lamp
1. Loosen the three fixation screws on the lamp cover (1).
1
1
1
3
2
Image 8-19
Lamp cover removal
2. Slide the lamp cover to the rear side of the projector (2) and down (3) to release and remove it. See image 8-19.
3. In case of SIM 7Q & SIM 7Q HC, unplug the lamp power connector.
Image 8-20
Lamp power connector (SIM 7Q & SIM 7Q HC)
4. Release the three fixing screws (1) of the lamp door and remove it (2).
1
1
1
2
Image 8-21
Lamp door removal (SIM 7Q & SIM 7Q HC)
R59770066 SIM 7Q SERIES 07/10/2013 245