7. Advanced
7.9.8 Combiner Patterns
What can be done?
The projector is equipped with different combiner patterns which can be used for adjustment purposes.
Geometry adjustments can not be used on these combiner patterns.
Some of the patterns can be inverted by hitting ENTER on the RCU while the pattern is displayed and some
patterns can be changed to another color by hitting Color – or Color + on the RCU.
Available Combiner Patterns
• Composite
• Alternating checkerboard
• Gray levels
How to display a Combiner Pattern?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menu bar.
3. Push the ↓ keytopulldowntheInstallation menu.
4. Push the cursor key ↑ or ↓ to highlight C ombiner Pattern.
5. Push the → key to pull down the Combiner Pattern menu.
6. Push the cursor key ↑ or ↓ to highlight the desired Combiner Pattern
Image 7-202
7. Press ENTER to confirm
The Internal Pattern will be displayed.
8. Press BACK to return to the Installation menu
.
230
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
