7. Advanced
7.6.1 Runtimes
Typical runtime
The lamp for this projector has its typical runtime. It must be replaced when the runtime is reached.
When this runtime is reached, a warning will be displayed on the projected image and the warranty will have expired. The warning
message can be removed from the image by pressing the Back key on the RCU, but it will pop-up again every time the projector is
switched to the active state, until the lamp has been replaced.
How to display the runtimes ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lam ps menu
4. Use ↑ or ↓ to select Runtimes
Image 7-94
5. Press ENTER
A text box is displayed
Image 7-95
R59770066 SIM 7Q SERIES 07/10/2013 139
To Next Page
Loading...
