7. Advanced
7.4.3 Edit file
What can be done with the Edit file menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
In this case a DVI source is used. A DVI source does not need any image file setting. All the fields are therefore
greyed out. See the dialog box below.
How to edit a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Edit
Image 7-25
5. Press ENTER
A dialog box containing the active file is displayed
Image 7-26
6. Use ←or →, the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER
Note: greyed out fields can not be upd ated
Advanced settings for Analog Data sources (e.g. RGB HS/VS)
The advanced button enables the advanced settings for analog data sources.
R59770066 SIM 7Q SERIES 07/10/2013
93
To Next Page
Loading...
