Barco SIM 7Q HB - Change Password; How to Change the Password

7. Advanced
7.9.10 Change password
What can be done ?
The OSD advanced items under More ...can be protected by a password. The items are by default protected by the password ’0000’.
This password can reprogrammed.
How to change the password ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Change password...
Image 7-204
5. Press ENTER
A dialog box is displayed.
Image 7-205
6. Use ← or → , the numeric keys on the remote , or the keypad to enter the old password and to enter and confirm the new
password.
Each character is displayed as an asterisk.
The new password is accepted if the new password and the confirmed password are a 100% match.
If the password is forgotten contact a Barco authorized technician.
232 R59770066 SIM 7Q SERIES 07/10/2013