8. Maintenance
8.3.1 Removing the x-cube filter
Necessary tools
Torx screwdriver T10
How to remove the x-cube filter?
1. Loosen the four screws fixing the x-cube filter cover
Tip: These s cre ws are fixed to the x-cube filter cover and can not drop.
Image 8-4
X-cube filter cover: fixation screws
2. Lift the x-cube filter cover to remove it
Image 8-5
X-cube filter cover: lift to remove
3. Take out the x-cube filter
Image 8-6
X-cube filter: lift it to remove
Caution: Keep the air filter in horizontal position while moving it away from the projector, so that no dust falls off.
Caution: Never put the air filter upside down! Always place it with the seal pointing to the surface where you place it.
238
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
