5. Setup
5.7.1 Locking the lens holder (rugged option)
The lens locking system is an option (rugged option) and is not available on standard projectors.
Necessary tools
• Torx screwdriver T10
• Allen key 2 mm (hexadecimal key)
• Allen key 3 mm (hexadecimal key)
How to lock the lens holder?
1. Make sure the lens is in the correct position
2. Remove the top lens cover
Image 5-9
Lens top cover: fixing screws
3. Slide both fixation blocks for the horizontal shift away from each other until they hit the lens holder frame
Image 5-10
Horizontal shift: free
Image 5-11
Horizontal shift: blocked
4. Fix these blocks by tightening the front bolts
R59770066 SIM 7Q SERIES 07/10/2013
55
To Next Page
Loading...
