5. Setup
5.2 Powering the SIM 7 projector
CAUTION: This projection product contains several optical elements which require a certain warm up time
in order to reproduce initial adjustments. If the environment (e.g. ambient temperature of the surrounding)
is stable, the product will typically reproduce functional performance within 30 minutes and achieve optimal
performance after 45 minutes (advised for multichannel display systems). It should be noted that the heat
dissipation of the product itself might influence its environment; if not monitored and corrected via external
responsive temperature controls, this might affect the typical settle time required.
How to power the projector ?
1. Switch the power switch to 1.
Image 5-1
BarcoSIM7:Powerswitch
L3 and L1 light up red. After the initialization period L1 turns off.
Image 5-2
Image 5-3
Standby state : L3 is red
R59770066 SIM 7Q SERIES 07/10/2013 49
To Next Page
Loading...
