Barco SIM 7Q HB - Selecting an RGB Source

7. Advanced
7.2.2 Selecting an RGB source
How to select the L1 RGB source ?
1. Press MENU to activate the Tool bar
2. Press ↓ to Pull down the Source Selection menu
3. Press → to open the L1 RG B-YUV menu
4. Use ↑ or ↓ to select RGB
Image 7-4
5. Press ENTER to confirm your choice
A bullet indicates the selected source which now appears on the screen.
Adjustments on an RGB signal
The projector allows different adjustments on an RGB signal :
• Contrast
• Brightness
•Phase
• Input balance
• Auto Image : or manual edit of the image file settings
In the same way, a YUV source can be selected and adjusted.
R59770066 SIM 7Q SERIES 07/10/2013 75