7. Advanced
7.7.3 Identification
The projector’s identification screen
The identification screen displays the projector’s main characteristics. The software version for the Master as well as for the Slave
is displayed (the first version is the master software version, both versions are separated with a “–” ).
How to display the identification screen ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Identification
Image 7-109
5. Press ENTER
On the screen appears a text box.
Image 7-110
6. Press MENU or BACK to exit or to go back to the previous menu
150
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
